| Area | Description |
| Base | Non ECW base rasters were not working when in a shared model on the client side |
| Base | Rasters were not being saved |
| Design | Corner angle was not working in Apply / Apply Many |
| Plots | Long section plotting of Super Alignments was behaving erratically |
| Survey | Road Upload was leaving off last point on the section for "Sokkia Roading String Road" |
| Visualisation | Billboard sizes no longer being limited to 4096 x 4096 |
| Area | Description |
| Align | Changing super alignment styles did not work for unsolved strings |
| Align | Super Alignment corridor calcs could produce incorrect extents |
| Base | 3d strings created as super strings could be closed incorrectly |
| Design | Mass haul could not read report file from Apply |
| Design | Mass haul misread data from mass haul file |
| Design | Mass haul did not take into account duplicate chainages |
| Plots | Fixed equality chainages for point labelling |
| Plots | XPlot could have occasional missing upright at zero-offset |
| Plots | Hatching between tins with a primary Super Alignment could fail |
| Plots | Model plotter no longer replaces spaces with minus sign |
| Survey | Survey Data Reduction wrote incorrect values for Attribute Set command |
| Survey | Land XML did not include date and time |
| Survey | Fixed bug with alphanumeric IDs in Check Survey Pts vs Design macro |
| Mod | All plot model strings are now named by their colour names |
| Mod | Add chainage/offset diff to Check Survey Pts vs Design macros |
| Area | Description |
| Base | Drop point on to very short line segments can fail |
| Base | MTF and file rename panels remove file extensions |
| Base | Shell commands in chains do not write command text when saved to file |
| CAD | Cad Line Tangent does not allow cursor snap |
| Design | Cuts through strings along a super alignment ignores last value in special chainage file |
| Plots | Fixed uprights for VIPs, HIPs, COGs for super alignments in long plots |
| Plots | 12d title block not plotted to raster printter |
| New | Added Leica DBX to ANG Macro |
| Area | Description |
| Align | Super alignment segment radius does not annotate |
| Base | Cartographic option is not chainable |
| Base | Duplicate field names in SLF for share panels |
| Design | Sight distance report in apply many was not being deleted if not used |
| Design | Overlay may behave unexpectedly when attempting to remove a tin after failure |
| Design | Overlay may crash when using sections from a tin |
| FileIO | Support reading & writing of project attributes to 12da and 12dxml |
| Mod | Sight distance now applies eye/target heights from tin |
| Area | Description |
| Align | Point tagging on Super Alignment fails to tag regular chainages on arcs |
| Base | Potential for writing chains to crash 12d |
| Base | Tabulate Range File crashes when use super strings is enabled in your env.4d |
| Base | Editing attributes with groups can result in lost attributes |
| Base | Tin and Model synchronize panels prompt for save even when no changes made |
| Base | SLF of Macro Run Panel does not work as expected |
| Design | Boxing many doesn't take into account gaps in the volumes |
| Drainage | Drainage PPF - Gap in uprights at pits done incorrectly |
| Drainage | Fix primary string name labelling across sheets |
| File IO | Write X Y Z General File for had 2 run buttons |
| Macros | All macro calls for face strings crash when use only super strings |
| Macros | Macros calls for Models can empty the model |
| Sewer | Fix sewer HC export to spreadsheet clipboard |
| Survey | Potential Buffer over run in Survey Data Reduction |
| Mod | Drainage Lplot - modify trunk junction labels |
| New | New macro call to set named tick box data with Integer type |
| Area | Description |
| Align | Various select widgets don't support Super Alignments |
| Base | Sharing allows users to rebind to non project directories |
| Base | Shx font drawn incorrectly |
| Design | Possible crash in Apply / Apply Many |
| Design | Boxing many function can crash in several circumstances |
| Design | Boxing many function links boxing strings over gaps |
| FileIO | Super strings with 2/3 pt linestyles are not correctly exported |
| Plots | Problem with upright weeding in Xplot |
| Plots | Converting an ascii ppf to binary and then plotting displays error |
| Reports | Regular interval control offset unsigned in QA report asbuilt string vs design string |
| Survey | LandXML 'Alignment' elements with spirals may not read correctly |
| Survey | Create Unique Points option crashes using when not using Super strings |
| Survey | Levels at the end of the traverse adjustment report are incorrect |
| Survey | TSS Bearing correction being reset to zero |
| Mod | Alignment/Super Alignment table supports fixed/floating as ips |
| Mod | X-section filtering now selects the longest x-section when duplicates are found |
| Mod | X-section filtering can now include vertical tangent sections |
| New | Added macro to import/export infoworks drainage data |
| New | New macro calls to access widening and super elevation on super alignment |
| Area | Description |
| Align | SUPER_ALIGNMENT_STYLE_4D not in env.4d editor |
| Align | Super Alignment editor for parts will crash is rare cases |
| Align | Partial spirals end up being interpreted as lines |
| Align | Fixed spelling of Chainge to Chainage in Super Alignment parts editor for computators |
| Align | Cut string computator gives incorrect chainage |
| Base | View Models to Front walkright menu does not include view name |
| Base | Speed Up interecting of objects against Super Strings |
| Base | Panels created by function keys were associated with the active view |
| Base | Models to Front menu fails to wok with userkeys.4d |
| Base | Instabillity in Bigfoot version |
| Base | Global String Rename always assumes use of sub strings |
| Base | Check strings reports point strings with only one vertex as zero length |
| CAD | CAD leaving rubber banding on screen |
| Chains | Macro commands in chains may run only after the chain is finished |
| Chains | Chains with very many (100 plus) option commands will drain resources and eventually crash |
| Chains | Chaining the creation of a super tin crashes 12d |
| Design | Unable to edit road tin or dtm of an apply if original deleted |
| Design | Tin colour in the apply many not used |
| Design | Super string creator may corrupt memory when setting the weight value |
| Design | String modifiers can crash if amend string is not found. |
| Design | Scarification in Overlay can crash |
| Design | Reading xfall from strings in overlay doesn't work if edge strings in different models |
| Design | Mass Haul does not work with some volume reports |
| Design | Inactive template modifers are still validated - so can generate meaningless errors |
| Design | Create Roads had widgets with duplicate names |
| Design | Create Roads does not handle boxing file from $ variable dir |
| Design | Create roads could crash in func recalc after using panel |
| Design | Apply Many Tadpoles forgotten if turned off |
| Design | Apply Many Defaults read and write locations inconsistant |
| Design | Apply Many boxing volumes may not take into account gaps in the template |
| Drainage | Fixed pipe sizing algorithm |
| File IO | Super strings with 2/3 pt linestyles are not correctly exported. |
| Plots | Xplot tin depth labelling can cause mis-labelling in boxes |
| Plots | Plotting to directories with spaces in name will not work |
| Plots | EHG of offset string doesn't work when primary string is SA |
| Survey | The Leica DBX to Field file converter failes to run |
| Survey | SLF's for AGD vs GDA panel do not always work |
| Survey | Reducing a field file can generate an Access denied error |
| Survey | Possible TSS crash on cleaning models |
| Survey | Pick parcel point doesn't work with irregular line |
| Survey | Leica DBX to FLD converter now handles databases in any folder |
| Survey | Coordinates are not supported in Geodat data collectors |
| Visualisation | Tins with triangles the same colour as their base colour would not render in Perspective OpenGL views |
| Mod | Allow overlay to process sections of the road |
| Mod | Addition to overlay to interact with an excel spreadsheet, now provided with the install |
| Mod | Drainage Analysis enhancements - see drainage documentation |
| Mod | Detention Basin Design updates - see drainage documentation |
| New | Various new macro calls for super string vertex properties |
| New | Macro calls for accessing equalities on the super alignment |
| Mod | New tick box on Survey Reduction to disable coordinate records in field files |
| Area | Description |
| Base | Files not found when set_ups and other env variables used not looked for in install directory |
| Drainage | Toggling on z-values on a view for a drainage string shows incorrect values |
| Mod | Resume options in apply many now disabled |
| New | Help->System information menu item added |
| New | New macro calls for Super Strings |
| New | New macro calls for Super Alignments |
| Area | Description |
| Base | Popups sorting incorrectly |
| Base | Check Strings does not check tinability very well |
| Survey | Incorrect version of Roadrunner add on was packaged |
| Tins | Exact volumes and tin analysis ignoring some triangles in very rare situations |
| New | New macro calls for getting the level of a Survey Data Reduction attribute |
| Area | Description |
| Align | Converting non super alignment to super alignment obtain the "labels" style by default |
| Align | Alignment/Super Alignment table crashes when vertical fixed/floating mode is selected and there is no vertical geometry |
| Base | Model Share menu can now be called from a user key |
| Base | Create Roads does not name Kerb returns properly when using 'To Letters' as a naming option |
| Design | Options under "Design->Estate Lots->Edit lots" did not calculate old area |
| Drainage | Non circular pipes may draw incorrectly in perspective view |
| Drainage | Fix to "Write inlet curves to model" for curves with no "coord" entries |
| Drainage | Drainage Network Editor "Clear Bypass Links" button did not delete gutter length, gutter grade and inlet type attributes |
| Drainage | Drainage Analysis Hydrology and Hydraulic reports can output commas into values in CSV file |
| Drainage | Bug in filtering flood extent channel x-sections, for some cases |
| FileIO | DWG outputs 3d polyline vertices on layer 0 |
| FileIO | acadplot.amf has non breaking spaces |
| FileIO | 12da reader should given an error when slant > 45 |
| Plots | Super strings with curves could be plotted in the X-Section plot |
| Plots | Super alignments would not plot from the quick plot option in Section Views |
| Survey | Exporting to Leica GSI omits feature code |
| Base | Measure / bearing distance panel now has different modes for calculating the grade |
| New | New option for setting string directions relative to a reference string |
| New | New option for reversing many strings |
| Mod | New runoff C method for the ACT |
| Mod | Points upload for SDR33 now has an additional field on the panel |
| Mod | Converting Geodimeter to FLD improvements |
| Area | Description |
| Align | Reading of astyles.4d needs better error messages when errors encountered |
| Align | IP labels for computators crashing |
| Align | Coverting fixed/floating to IPs sets incorrect vertical modes |
| Align | Converting SA Elements to IPs may use the wrong IP for vertical IPs |
| Base | Delete Empty Models doesn't modify project and deleted models may recreate on startup |
| Base | Using the clean model chain command on a model with a tin can cause a crash |
| Base | Transformations of super strings with no z dimensions to a constant z dimension fail |
| Base | Tin Drape does not remember all settings in SLFs, chains |
| Base | Resolve super alignment chain command doesn't set models to dirty |
| Base | Labelling individual points with a pre/postfix in Label Chainages does not label properly |
| Design | Apply Many creates a hinge string when copy hinge is off but a road tin is created |
| Drainage | Drainage network editor bug with setout and centre string selection |
| Drainage | Drainage network editor - "set pit details" and "regrade pipes" now sets/updates pipe attribute "diameter" |
| FileIO | Unknown GENIO bug - see Alan |
| FileIO | Text may not be displayed in Autocad if exported using .dwt file |
| Plots | Windows plotter not using milillimters for drawing units may scale incorrectly |
| Plots | Super string with rgb fill did not plot properly |
| Plots | Several problems with EHG/EVG plot labels |
| Plots | QLD rail plot gives wrong vertical curve info |
| Plots | Face strings fill not plotting in rotated plots |
| Survey | Survey Data Editor find command reports found line number as zero based |
| Mod | Error detection and delivery improved and now handles proxy servers |
| Mod | Removed some IO format choices |
| Mod | drainage.4d - now select cap_curve_grade entries within a manhole entry by xfall then grade |
| New | Drainage Plan Plot - added mode to plot pipe HGL levels |
| New | New macro calls for textstyle box |
| New | New calls for accessing source box favourites data |
| Mod | Allow multiple offset strings per set for EHG/EVG labels |
| Mod | Share Models and Share Tins panels now start with a larger size |
| Mod | New tick box on Survey Reduction to disable co-ordinate records in field files |
| Area | Description |
| Align | Super alignment info panel shows direction angle, not bearing |
| Align | Closing a super alignment failed when using floating line end point |
| Align | Clicking on the "New super alignment properties" tick box when trying to join two superalignments causes a crash |
| Base | If a model is shared but not loaded on a view at project load time, the model can not be unshared until added to a view |
| Base | Drawing symbols in the super string could cause random crosses to be drawn at (0,0) |
| Base | Chain does not resolve user_lib variables for plot command type |
| Design | Wrong volumes in NS to Subgrade volumes in rare boxing scenario |
| Design | Corner angle does not work in Apply / Apply Many |
| Drainage | Fixed minor problems in drainage networks with mixed flow directions |
| Drainage | Drainage network editor pit highlighting fixed |
| FileIO | Outputing a table with only 1 row or 1 column to Autocad failed |
| FileIO | Alignments with non clothoid spirals could not be output to DWG |
| Survey | TSS Search ID only searches for Description, Node oID, Mark oID |
| Visualisation | Some extrusions were renamed, rather than new extrusions added |
| New | Convert to Super Alignment now pops up an attributes panel on conversion |
| Mod | CAD move now supports feature strings |
| Mod | When a .DWT is used, the unit value flag is ignored |
| Mod | Circles with a "height" (ie pipes/columns) now import as super strings with a diameter |
| New | Added macro calls for Autocad patterns |
| Mod | TSS Point Info Panel column moved to a new position |
| Survey | TSS Description as comment is no longer required |
| Mod | Create Forest now works with chains |
| Area | Description |
| Align | Super alignment parallel does not do anything with the vertical |
| Align | Super Alignment Join may not work under certain circumstances |
| Align | Move tangent may not work due to uninitialised memory |
| Align | Min distance for reverse and broken back curves is wrong |
| Align | Line intersection in VG solver may fail when sharing the same end point |
| Align | Copying a super alignment doesn't copy Design Parameters |
| Align | Converting Alignment to Super Alignment doesn't set the vertical chainage interval correctly |
| Align | Computator cut through string - the horizontal may be short |
| Align | 12d can crash when super alignments are added as corridor models |
| Base | View names in setups.4d that contain illegal characters are still created |
| Base | Using an alignment for a boundary option can crash 12d |
| Base | Survey->Edit->Strings->Join gives message "cannot join the strings of different names" |
| Base | Sharing does not work when the "new model name" or "new tin name" field is used when adding the shared data |
| Base | Partial spiral length reported incorrectly on string inquire |
| Base | Panels that can not be written to SLF are included when doing a Layout Output |
| Base | Incorrect message on select box when using a line selection |
| Base | Failure during sharing could cause an incorrect undo to be run |
| Base | Depth range populator does not resolve interval if no sign given |
| Base | Chains do not always resolve $USER_LIB and other variables |
| Base | Area / centroid can fail for super string with certain arcs |
| Base | Apply defaults could crash if some modules missing |
| CAD | Strings->Points edits->Height can crash |
| CAD | Cad rotate doesn't rotate arcs properly |
| Design | X-sections along a string ignores start and end chainage values |
| Design | Setting the boxing file in the MTF editor using a $ variable (user_lib, lib, etc) does not populate the boxing chainages grid |
| Design | Overlay may corrupt memory during scarification |
| Design | Overlay can crash on selecting source mode |
| Design | Incorrect wording in header of xfall / offset report |
| Design | Drape Alignment still includes critical points even tick when turned off |
| Design | Create roads does not clear the data models used by the created road tin |
| Design | Create roads boxing stems are incorrectly parsed when no asterix used |
| Drainage | Internal array sizes for drainage quantities report macro too small |
| FileIO | Multi line text output in DWG is in the wrong location |
| FileIO | Font file is not exported to Autocad when a mapfile is used |
| FileIO | DWG - Unit for metric defaults to millimeters, not meters |
| Plots | Plotting shared models will fail |
| Plots | If a Windows printer fails to be created, it is possible for 12d to crash |
| Plots | Drainage plan plots not parsing all escape sequences correctly |
| Survey | Update block in TSS not updating subsequent blocks |
| Survey | Traverse/radiation does not label point numbers properly |
| Survey | Traverse spreadsheet descriptions are being converted to lower case |
| Survey | Traverse Spreadsheet - Unique description check failed to check case |
| Survey | Purpose set to witness but other information not updated |
| Survey | Point info panel in TSS panel displays wrong northing and easting |
| Survey | Mark purpose is incorectly mapped |
| Survey | Leica 1200 Roads option crashes if you specify more then 4 layers |
| Survey | Least Square Adjustment initial points set to fixed, causing validation warnings and lost observations data |
| Visualisation | Draping of rasters slower in v8c1g |
| Mod | Super alignment style now has a reading angle |
| Mod | Enhanced default style for superalignment labelling |
| New | New option to copy vertical geometry from one string to another |
| Mod | Create roads now provides better error handling at failed intersections |
| Mod | Apply many volumes now show subgrade and non subgrade volumes |
| Mod | Storm analysis now posts warning messages about invalid columns in IFD table |
| Mod | Enhancement of "Design=>Drainage-Sewer=>Create from strings" |
| Mod | Drainage Plan Plot now supports grouping of MH symbols with labels |
| Mod | Drainage Network Editor now sets more pit attributes |
| Mod | Changes to interpolation procedure for overland flow |
| New | Drainage Network Editor Set Pit Details now sets gutter attributes for I/O with "Drains" |
| New | Drainage Network Editor Set Pit Details now creates "sag pond spill crest" points in construction model |
| New | Drainage Analysis - new "Choke Surchage Flows" tick box |
| New | New macro calls for backing up and restoring files (eg: env.4d.1, env.4d.2) |
| New | New macro calls for accessing super alignments |
| New | New macro calls added for setting and getting time updated/created for models and tins |
| Mod | Xfall / offset now reports offsets when no z values |
| New | Traverse Spreadsheet - Choice box for default conditions other than reliable and not found |
| Description |
| What's New now has a section for Drainage and Drainage Analysis |
| Help added to Super Aligment toolbar |
| Getting started PDFs moved to Training DVD and What's New DVD |
| F1 keys working for CAD Command icons on toolbars |
| Area | Description |
| Align | Super Alignment using speed tables may crash if read in without the speed tables |
| Align | Re-solving an unusual super alignment was causing a crash |
| Align | Kerb return functions with super alignments always reset the vg |
| Align | Chainage equality tick box in super alignment editor does nothing |
| Align | Asymetric parabola may crash if the leading or trailing part is not a line |
| Align | 'Set' on the super alignment editor could cause a crash |
| Base | Turning off modules via About 12d Model was causing a crash |
| Base | Lauching Wibu Control Panel in 64 bit Windows does not work |
| Base | Chain editor crashes if an option is previewed directly after an adjacent option is deleted |
| Base | Applying a map file can result in constant and variable text info dimensions |
| Base | An empty colours.4d file could cause a crash |
| Base | 12d can disappear without any error if a plan view has 0 world extents |
| Design | Overlay may crash when loading the xfalls with a super alignment cl |
| Design | Help and Finish buttons around the wrong way in Super String editor |
| Design | Create roads fails in some cases due to roads being cut down around intersections |
| Design | Create Roads crashes on Function Recalc if the road or boxing tin is deleted |
| Design | Create Roads crashes if a centreline is deleted between runs |
| Design | Create Roads can crash when failing to create a culdesac |
| Design | Apply Many defaults can crash if some modules are missing |
| Drainage | Sump levels not drawn in perspective view |
| Drainage | Strings with only 1 MH not drawing diameters in plan view |
| Drainage | Strings with only 1 MH drawing the invert at minus infinity in section view |
| Drainage | Strings with only 1 MH could not be joined to other strings |
| Drainage | Problem with % character in Hydrology report |
| Drainage | Potential problems when labelling some service uprights in Drainage long section plots |
| Drainage | Pit schedule calls wrong macro |
| Drainage | Bug in manual "Grate RL mode" on Pit Tab in Drainage Network Editor |
| File IO | Reading Text Strings from 12da can lose the text colour |
| File IO | Error messages are generated when reading a map file with solid fill information |
| Plots | Section View plotting does not annotate Super Alignments |
| Plots | Not enough space allocated for Text annotations on screen and in plots |
| Survey | Vertex selections in transformations behaving unexpectedly |
| Survey | Update point info doesn't refresh the Traverse Spread Sheet panel |
| Survey | Traverse Spreadsheet Adjust/unadjust parcel shouldn't change any point information except description |
| Survey | Some transformations ignoring holes on super strings |
| Survey | Leica 1200 1 point super strings ignores Point ID's |
| Survey | GSB files not accessible from LIB and USER_LIB |
| Survey | Geodetic Reporting reports combine point scale even when no n value adjustment is given |
| Survey | Conversions involving NTv2 may not work correctly |
| New | Tabulate IPs macro added to Super Alignment Toolbar |
| Mod | String Inquire at Vertex of a Super String now shows any vertex text |
| Mod | Polygon box now has a "Skip Checks" option |
| New | workspace_read and workspace_write now allowed in toolbars.4d, xtramenu.4d, usermenu.4d and userkeys.4d |
| Mod | New attributes added to aid the Import/Export process |
| Mod | Drainage Network Editor - Set pit details now warns if grate below invert |
| Mod | Drainage Analysis - contain flooded widths within levees |
| New | Drainage Analysis - Two new tc methods added |
| New | New macro calls for drawing different image types |
| New | New macro call for profiling an element on a section view |
| New | Traverse Spread Sheet - Now performs error checks using log lines |
| New | Traverse Spread Sheet - Added new bearing type: Easement Adopted Calculated |
| Area | Description |
| Align | Free parabola by length not solved when leading or trailing element is a parabola |
| Align | Converting super alignment to a "3d" string can result in unusual z values |
| Base | Toolbar help doesn't work the first time it is called |
| Base | Symbols on plan view may be culled when too small |
| Base | Super string editor vertex/segment navigation doesn't allow user to click Long_box browse and pick a target |
| Base | Some Source Boxes that allow vertex selections alter the entire string |
| Base | Area calculation of a super string with holes is wrong |
| Base | 12d may crash when using 'same as' in a symbol box on a non super string |
| CAD | String->Points->Delete crashes when picking a tin profile on a section view |
| CAD | CAD Symbol edits can crash when retrieving non existent symbol from a super string |
| CAD | CAD split / CAD link clip can crash if target is not a super string |
| Design | Create roads fails to create a kerb return when the radius of a curve on road is equal to its width + kerb return radius |
| Design | Apply Many boxing model names not carried over when converting from v7 to v8 |
| Design | Append+Text in Super String Editor doesn't create text |
| FileIO | Added zoom extent box to handle DWG writing bug |
| Plots | Invalid time parameters in ppfs can cause a crash |
| Survey | Survey Data Reduction allows duplicate .FLD files |
| Mod | Drainage plan plots now plot all matching pipe styles |
| New | Drainage plan plots now support plotting of normal/critical flow depths |
| Mod | Survey Data Reduction Editor now allows searching for each Field File |
| Description |
| What's new in v8 DVD |
| Reference Manual |
| Area | Description |
| Align | Free arc by radius does not always give a desired default solution |
| CAD | Cad copy gives an error message that you can't get out of |
| CAD | Cad arc by centre, angle, sweep always creates a circle |
| Chains | Unable to write a chain after a command is deleted without selecting another command first |
| Drainage | Problems re manhole symbols with sumps in drainage long section plots |
| Drainage | Drainge analysis panel appears to crash due to memory corruption |
| Drainage | Basin design not working due to input attributes being reset |
| File IO | Land XML problems when unnecessary points in surface elements |
| General | Populating by range unable to handle negative intervals |
| GUI | Output window behaves unexpectedly when converted or closed in an auto hide state |
| Macros | Sum plan areas by colour macro crashes when RGB colours used |
| Survey | Roadrunner dlls not working for stringing uploads |
| Survey | Road Runner upload of Super Alignments creates empty vertical geometry |
| Mod | Leaving the remark field blank in Genio will now set the remark field to the station id |
| Mod | Genio can now write super strings as a 4d string |
| Mod | Sharing rebinding now looks for first available directory from last known location |
| Mod | Changes to drainage long section plots for manhole symbols with sumps |
| New | Additional buttons to clear links for catchment, road design and overland flow strings |
| Description |
| Dongle changes to env file for practice version |
| Area | Description |
| Align | Super alignment elevation not solving in some cases when used with compound curves |
| Align | Super alignment editor may cause a crash when superelevation diagram open |
| Align | Super Alignment editor crashes when a non existant part number is used |
| Design | Pavement overlay rejects non super string, alignment or super alignment strings when loading xfall values |
| Design | Create Roads lip of kerb field not being validated |
| Design | Apply many editor too reliant on reference string and may lock strings from other processing or cause a crash if reference string is deleted. |
| Design | Apply Many - tins lost when running an apply many from v7 |
| Drainage | Drains and pcdrain areas not calculated correctly for multiple catchments |
| File IO | Unexpected behaviour in 'Use Label Map File' when 'Use Models for Labels' is off |
| File IO | Times in 12da reader treated as local not GMT |
| General | Sharing temp files not cleaned up |
| General | Can no longer open newer projects in older versions |
| Plots | Tins needed to be loaded before plotting |
| Plots | Super Alignment may be clipped in some long section plots |
| Survey | Traverse Spreadsheets crash when deleting strings being used by active processing |
| Survey | Traverse Spreadsheets crash when changing end pt number to invalid value |
| TINs | Tins could be created from super strings with no non-null z values |
| Training | Training data not correct for practice version |
| Mod | Road boundary now first in polygons model in Apply, apply many |
| Mod | Kerb return function now adds fixed and floating elements to Super Alignments, instead of using the IP method |
| Mod | Trimble link drivers updated on installation cd |
| Mod | Leica Roadrunner drivers updated |
| New | Opcodes now shown on all popups of SDR editor |
| Mod | Pit names, string names and pit types now case insensitive |
| New | New attributes added for reporting |
| New | Grate level settings now independent of cover and set out level |
| New | Flood and capacity storage volumes now calculated at sag pits and set as attributes on pits and polygons (if user has the Volumes module) |
| Area | Description |
| Align | Setting start chainage of Super Alignment to0 did not sync vertical geometry |
| Align | Alignment strings displayed the incorrect z values in section views when negative chainages used |
| Design | Create Roads - Kerb returns could not be edited by selecting the string |
| Design | Create Roads - Crash when restoring function after cl model deleted |
| Design | Apply Many - the interboxing volumes were all zero. Some other volumes not calculated |
| Design | Apply Many - additional messages displayed due to spirals |
| Macros | Macros using attribute calls may crash |
| Mod | Warning on existing project details if values not saved |
| New | Sharing now prompts user if source project is no longer found |
| Mod | report added to Utilities => A-G => Check Strings |
| New | Sharing for tins changed |
| New | Sharing for models changed |